Skip to content

Shelly Plug S🔗

Shelly Plug S can be used with the Tasmota firmware.

Connect to Wifi SSID of Shelly Plug S and connect to web interface http://192.168.33.1/ and configure local wifi network.

Install the firmware:

http://shellyip/ota?url=http://ota.tasmota.com/tasmota/shelly/mg2tasmota-ShellyPlugS.zip

Connect to Tasmota Wifi SSID and configure the plug. After that open the URL http://shellyip/.

Configure template (Configure > Configure Other):

{"NAME":"Shelly Plug S","GPIO":[57,255,56,255,0,134,0,0,131,17,132,21,0],"FLAG":2,"BASE":45}

Configure device (Configure > Configure Module):

BlitzWolf SHP (45)

Configure MQTT (Configure > Configure MQTT:

  • Host: //IP address of Home Assistant//
  • User: //user in Home Assistant//
  • Password: //user in Home Assistant//

Calibrate the device (with readings of 235V and 35W):

savedata 1
VoltageSet 235
PowerSet 35.0
savedata 0

The information can be found in this video.